Reconhecimento de placas Sign Assist (requer câmera A5)

Selecione módulo 5F (Eletrônica de infotainment)

Selecione channel (63) vehicle function list BAP traffic_sign_recognition_0x21

Defina=Active

Selecione channel (151) vehicle menu operation-menu_display_road_sign_identification

Defina=Active

Selecione channel (153) vehicle menu operationmenu_

display_road_sign_identification_over_threshold_high

Defina=Active

Selecione módulo A5 (front / advance camera)

byte 1, Bit 0 ativo - "01 Traffic Sign Recognition (FTE) active"

Selecione módulo 17 (Conjunto de instrumentos)

byte 5, Bit 2 Aktivate

Control unit A5 (front / advance camera)

Selecione: channel numbers indicate end of speed limit

Importance to actively invest Show Valid suffix

View Channel Valid suffix

Corresponding valor adjust default: 00100111

LUB (od2017)

Selecione módulo 17 (Conjunto de instrumentos)

Byte 5, active bit 2

Selecione módulo A5 (front / advance camera)

Byte 01, activate Bit 0 (sign assist activate)

Byte 16, activate Bit 4 (sign assist activate)

Selecione módulo 5F (Eletrônica de infotainment)

Car_Functions_List_BAP_Gen2: traffic_sign_recognition_0x21, not activated -> activated

Car_Function_Adaptations_Gen2: menu_display_road_sign_identification, not activated ->

Car_Function_Adaptations_Gen2:

menu_display_road_sign_identification_over_threshold_high, not activated -> activated

Selecione módulo A5 (front / advance camera)

Road sign detection fusion mode: Road Sign Fusion -> Road Sign Detection.

Selecione módulo 82 (Head up Display)

byte 0, Bit 0 ativo

Se aparecer erro no módulo 13 (Data Bus):

Selecione módulo 13 (ACC)

byte 1, Bit 0 ativo