Codificação MQB
Ativação do Active Lane Assist
Selecione módulo A5-Front Camera
Security Access -> 20103
HC -> coded
EFB -> coded
BAP personalization -> active
Personalization of lane dept.warning CL.15 -> last setting
System mode, lane dept. warn, -> Selection via menu
Switch-on ignition, lane dept. warn. -> Selection via menu
Directional stabilization assist driver inact deactiv threshold -> late
Selecione módulo 17-Instrument
Byte 4: Bit 6 (Lane Assist) -> coded
Byte 5: Bit 3 (Lane Change Assist) -> coded (Se występuje side assist/blind spot)
Selecione módulo 09-Central Elec.
Byte 35: Bit 0 (heading_control_configr) -> coded
Selecione módulo 44-Steering Assist
Byte 2: Bit 0 (Heading control assistant) -> coded
Selecione módulo 5F-Infotainment
Car_Function_Adaptations_Gen2-Menu_display_lane_departure_warning -> activated
Car_Function_Adaptations_Gen2-Menu_display_lane_departure_warning_over_threshold_high -> activated
Car_Function_List_BAP_Gen_2-LDW_HCA_0x19 -> activated
Car_Function_List_BAP_Gen_2-LDW_HCA_0x19_msg_bus -> Terminal 15
Se wychodzi erro "Moduł niepoprawnie zakodowany" to w módulou A5 codificar fora Byte 12: Bit 5
Se występuje erro w módulou A5 C10AC F2 [009] - Lane-Holding Assistance not Coded [HC_interface_at_the_steering_not_activated] é preciso wgrać kody fec/swap odisem